LOADING SITE CHANGE

🔧 Loading Site Change

(Modem 786 Already Connected)

🎯 Training Objective

Change a machine's loading site following an update on IPOT WEB.

📌 Important Notes

• Make sure the SIM card is properly inserted before starting.
• Incorrect configuration may prevent the machine from communicating with the platform.

Step-by-Step Instructions

✅ Step 1: Locate the Modem in the Configuration

• Press the following button:

• Scroll down to the Preferences tab and press the indicated button.

• Scroll down to the Wireless tab and press the indicated button.

• Ensure that the Modem option is enabled (a green dot will appear next to “Enable”).
• If not, press the button OK to enable it.
• Scroll down to the Trackweight 786 option and press the indicated button.

🛠️ Step 2: Modem Configuration

• The screen will display Config Wizard. Press the button to begin.

• Confirm that you want to proceed with the guided configuration by pressing the button.

• On the SIM CARD screen:
• Scroll to the Other SIM option and press OK to confirm.
• Then press the F3 button.
• Enter your APN in the top field. Use the correct APN based on your provider:
• TELUS: sp.telus.com
• BELL: pda.bell.ca
• Press the F3 button to continue.

🌐 Step 3: Connect to the IPOT WEB Platform

1. Enter the IPOT WEB login credentials provided by your system administrator:
• Username
• Password

🏭 Step 4: Select Loading Site and Machine Code

• Choose the desired Loading Site, then press the next button.

• Select your Machine Code from the list and press the next button.

• Press the F2 button to confirm the changes.